HOTO AutoCare Air Duster & Vacuum

Ideal for detailed cleaning of car interiors, home surfaces, office desks, and keyboard dust.

Tackle dust in every corner. 4-in-1 Functionality, 20000Pa Powerful Suction, 50m/s High-Speed Airflow.

Features

• 4-in-1 Functionality: Equipped with 5 attachments, perfect for cleaning, inflating, vacuum sealing, and more.
• Powerful and Efficient: Up to 20,000 Pa suction and 50 m/s airflow with three modes: Boost, Standard, and Eco.
• Compact and Versatile: It weighs just 0.78 lb and can run for up to 30 minutes with a 2,500 mAh battery.
• 5 Accessory Kit Included: Includes a 2-in-1 grooming brush, dust cup nozzle, crevice nozzle, swim ring inflator, and precision air nozzle for every cleaning scenario.

Includes

• 1x Air Duster & Vacuum
• 1x Pointed Crevice Nozzle
• 1x 2-in-1 Grooming Brush Head
• 1x Subtle Air Nozzle
• 1x Swim Ring Nozzle
• 1 x Small Cleaning Brush
• 1x Dust Cup Nozzle
• 1x Dust Cup
• 1x Carrying Pouch
• 1x Charging Cable

Specifications

• Dimensions: 2.17" x 2.17" x 6.65" (55 x 55 x 169mm)
• Weight: 0.78 Ib (352g)
• Max Suction: 20000 Pa
• Battery: 2500mAh Lithium-ion
• Rated Input: 5V, 3A
• Rated Voltage: 10.8V
• Rated Power: 135W
• Charging Time: Approx. 2.5 hours
• Operating Temperature: -10°C to 45°C
• Filter Type: High-density HEPA Filter

How to Use

• Battery level indicator
  • White indicator light stays on when battery power is above 20%.
  • Red indicator light stays on when battery power is below 20%, indicating charging is needed.
• Charging
  • Fully charge the product before first use.
  •  Use a safe USB adapter that matches the product charging requirements.
  •  During charging, the white indicator light breathes slowly.
  •  When fully charged, the indicator light stays on for 20 seconds and then turns off.
  •  Do not use the product while charging.
• Power On / Power Off / Gear Switch
  • Power On: Press and hold the ON/OFF button for 2 seconds to start the product.
  • Power Off: Press and hold the ON/OFF button for 2 seconds to stop the product.
  • Gear Switch: The product starts in High Gear by default. Press the ON/OFF button once to switch between Low Gear and High Gear.
  • Boost Mode: Press the Boost button in any gear to activate Boost Mode for stronger performance. Press the Boost button again to return to the previous gear.
• Dust Cup Filter Removal & Installation
  • Pull open the metal puller at the bottom of the dust cup and remove the filter cartridge.
  • Rotate to unlock the cartridge cover and remove the metal mesh filter.
  • Replace or clean the filter if needed.
  • Reassemble the filter and rotate it into place.
  • Insert the filter back into the dust cup and secure it completely.

Care Instructions

• Be sure to use original parts; Otherwise, it may not function properly.
• If the filter is blocked, the mode indicator will flash, and the main unit will stop after 5 seconds.
• Please clean the filter promptly before using it again.
• Before cleaning, ensure the accessories are detached from the main unit to prevent accidental
• startup causing personal injury.
• When not in use for a long time, please fully charge the vacuum cleaner and store it in a cool and dry place. Do not put it under direct sunlight or in humid environments.
• The body is not washable, but can be wiped with a soft dry cloth. Do not let water enter the
• charging port.
• Do not place the dust cup assembly in the dishwasher or washing machine for cleaning.
• Do not dry the dust cup assembly near a drum dryer, oven, microwave, or open flame.
• Do not use detergents to clean the body or accessories.
• It is recommended to replace the filter cartridge every 3 months based on actual usage (not included).
• Do not use the vacuum function without the dust cup assembly installed.

Notice

• Please don't attach the inflation nozzle to the air inlet port. Improper installation may result in mechanical obstruction and operational failure.
• Avoid leaving the device uncharged for long periods to prevent battery protection mode from activating.
• Ensure the dust collection cup is installed when using vacuum mode.
• Do not attach nozzles simultaneously to both the suction and blowing ports.